M4 CQB Gel Blaster Black or Tan

The M4 CQB NF Version features Nylon Receiver, Nylon Buffer Tube, 460 Long Shaft Motor, can hold two batteries in the stock & is averaging around 240-250 FPS.

Features

• Sturdy Nylon Construction
• Manufactured by well known CYMA brand
• Comes with Alloy Outer Barrel
• 2x Colour Options - Black or DE (Tan)
• Velocity around 245-250FPS

**Orange tip shown for illustration purposes**

Specs

• Gel Type: 7-8mm (AKA, Orange or Blue Gels Suitable)
• Inner barrel size: 7.45mm
• Inner barrel length: 29.5cm
• Barrel Type: Plastic
• Battery Source: 7.4 Battery with JST plugs
• Gearbox Style: V2 AEG Style Hard Nylon
• Spring: 1.25
• 460 Long Shaft Motor
• 7mm Bushings
• Has its own style of blue plastic piston, cylinder head & nozzle
• Cylinder: Ported 80%
• T-Piece: Own Style of CYMA T piece
• Blaster Length: 72cm
• Mosfet: No
• Velocity: 230-240 FPS
• Fire Selector: Safe / Semi Auto / Full Auto
• Construction: Receiver, Trigger, & Stock is Nylon, Handguard & Mag is ABS Plastic
• Gears: 18:1 Blue Plastic Type
• Magazine Capacity: Approx 240 Gels
• Suitable Magazine: CYMA M4 Magazine
• Suitable Hopup: DK Gen 9 Hopup

In the Box

• 1 x CYMA M4 CQB NF Gel Blaster
• 1 x  CYMA Magazine
• 7.4v JST Battery
• 1x 7.4v USB Charger/11.1v USB Charge
• Glasses
• 10,000x gel balls

Charging Batteries

Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

When charging the batteries, we recommend charging them between 1-4 hours.
When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

 Soaking & Storage of Gels

When soaking the gels, they need to be washed fully submerged in water from the tap for a minimum of 5-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work correctly.

You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend that you do this to change the water every couple of weeks.